GuideHardware
Heat-set inserts for 3D prints: sizes, temperatures and installation
What brass heat-set inserts are, the M2 to M5 size families with hole and wall figures, the iron temperature rule, and the 181 kg M3 pull-out from CNC Kitchen's test.
Tagged “heat-set-inserts”
Read the guideOpen
AnswerHardware
How strong are heat-set inserts in PLA? Pull-out figures
CNC Kitchen's measured pull-out loads for M3 heat-set inserts in PLA: 181 kg for Ruthex, 157 kg for eBay inserts, 39 kg for cheap ones, and how hole size changes it.
AnswerHardware
Heat-set inserts or captive nuts for printed parts?
CNC Kitchen's M3 test in PETG: a bottom-pocket nut held 166 kg against 119 kg for a heat-set insert, but the insert took more torque. When each fastening wins.
AnswerMaterials
What temperature to set the iron for heat-set inserts in PLA, PETG and ABS
Iron temperature per material for heat-set inserts: about 225 °C for PLA, 245 °C for PETG and 265 °C for ABS, from CNC Kitchen's printing temperature plus 10 to 20 °C.
AnswerHardware
Do heat-set inserts work in PETG?
Yes: brass heat-set inserts hold in PETG at an iron temperature of about 245 °C, and the part stays rigid to a glass transition near 80 °C. Expect stringing from the tip.
AnswerHardware
How to install heat-set inserts straight without a press
A soldering-iron procedure for square, flush heat-set inserts: iron 10 to 20 °C above printing temperature, melt about 90 % of the way, finish with a flat tool.
AnswerTroubleshooting
How to remove or straighten a crooked heat-set insert
Reheat a tilted insert at 20 °C above printing temperature (240 °C for PLA) and press it flush, or pull it out on a screw in about 10 seconds; drill 5.6 mm for an M4.
AnswerHardware
What hole size does an M3 heat-set insert need?
Hole diameter, hole depth and minimum boss wall for standard, short and Voron M3 heat-set inserts, taken from the Ruthex and CNC Kitchen size tables.